• Monday–Friday
• 6:30 AM – 3:00 PM

• Monday–Friday
• 5:30 AM – 4:00 PM

• $16.00–$19.00 per hour
• Starting pay is based on experience.

• Receive incoming shipments and verify materials
• Prepare and package outgoing orders
• Load and unload trucks safely
• Maintain accurate shipping and receiving records
• Enter data into the computer system accurately
• Organize inventory and maintain a clean work area
• Work closely with production and warehouse personnel

• Previous shipping and receiving or warehouse experience preferred
• Basic computer skills are required
• Ability to accurately enter and track information in a computer system
• Must be able to lift 50+ pounds repeatedly throughout an 8–10 hour shift
• Strong attention to detail and organizational skills
• Reliable attendance and a positive work ethic
• Forklift experience is a plus, but not required

• Competitive pay
• Weekly pay
• Opportunity for long-term employment
• Support from a dedicated local recruiting team

• Perform thorough inspections of raw materials, components, and finished parts
• Verify measurements using micrometers, calipers, gauges, and other precision instruments
• Conduct internal quality audits and prepare detailed inspection reports
• Identify defects, non-conformances, or deviations and recommend corrective actions
• Ensure compliance with company and industry standards (AS9100 knowledge preferred)
• Maintain accurate inspection records and documentation
• Support continuous improvement and process optimization initiatives
• Follow all safety and quality policies to maintain a clean, efficient work environment

• Required: Previous quality control or inspection experience in the aerospace industry
• Proficient with precision measuring tools and inspection documentation
• Strong analytical, problem-solving, and communication skills
• Ability to interpret blueprints, drawings, and technical specifications
• Familiarity with AS9100 or ISO 9001 quality standards a plus

• Cut and package materials according to customer and company specifications
• Load customer vehicles and company delivery trucks safely and efficiently
• Assist with unloading materials from company delivery vehicles
• Maintain accurate inventory counts and material organization
• Inspect incoming materials for quantity and condition
• Keep the lumber yard and warehouse clean, organized, and free of debris
• Operate forklifts and other company equipment safely and efficiently
• Load, unload, stock, and pull merchandise as needed
• Perform daily equipment inspections and report maintenance or safety concerns
• Report all accidents and incidents immediately to management and complete required documentation
• Follow all company safety policies and procedures

• Previous forklift experience required
• Ability to accurately read a tape measure to the 1/32"
• Experience working in a lumber yard, warehouse, building materials, or related industry preferred
• Strong attention to detail and inventory accuracy
• Customer-focused attitude with good communication skills
• Safety-conscious mindset
• Ability to lift, carry, and move materials throughout the workday
• Reliable attendance and strong work ethic

• Process and manage medical records requests accurately and efficiently
• Enter new hospital patient information into the system
• Verify patient eligibility and insurance information
• Assist with Self-Pay Accounts Receivable (AR) activities
• Help post dialysis charges on a monthly basis
• Sort and deliver outgoing mail to the designated mail area
• Maintain confidentiality and compliance with all patient information regulations
• Provide general administrative support as needed

• Previous medical office, medical records, or healthcare administrative experience preferred
• Strong computer and data entry skills
• Excellent attention to detail and accuracy
• Ability to prioritize tasks and manage multiple responsibilities
• Professional communication and customer service skills
• Dependable attendance and punctuality
• Positive attitude with the ability to work well with others
• Self-motivated and able to take initiative

• Has a positive, team-focused attitude
• Takes initiative and works independently when needed
• Is dependable and arrives on time every day
• Enjoys helping support a busy healthcare team
• Maintains a high level of professionalism and confidentiality

CNC Machinists Wanted

HireCall is hiring CNC Machinists 2nd and weekend shifts to join a busy and highly skilled team at our climate-controlled facility.
Experience: Required 2+ years in CNC
Shifts:
2nd: 4:30 pm - 3am Monday through Thursday
3rd: (weekend) 6am-6pm Friday through Sunday

This isn’t your average machine shop job — our machinists work on complex, high-precision parts using some of the most advanced equipment in the industry.

If you thrive in a fast-paced, hands-on environment and take pride in setup-heavy, precision machining, this is the opportunity for you. Reliability, flexibility, and strong problem-solving skills are key to success in this role.

Machines You’ll Work On

Our client runs a variety of different machines.  If you have experience operating Doosan, bridge mills, Okuma, Mazak, HAAS this might be the job for you.

• Large Okuma VTL â€“ 5-axis vertical turning lathe, OSP controls (High skill)
• HAAS VF-9 â€“ Vertical 3-axis mill, HAAS controls (Mid to High skill)
• MAZAK e-1250 â€“ 5-axis VTL with 8-pallet system, SMOOTH AI controls (Mid to High skill)
• MAZAK Versatech V140/360 – Large bridge mill, 5-axis, SMOOTH AI controls (Mid to High skill)

• Large SNK RBF 250F2 Bridge Mill â€“ 5-axis, Fanuc controls (Mid to High skill)
• Large Mitsubishi MVR35 Bridge Mill – (Mid to High skill)
• Doosan HP 5100 (500mm) â€“ 12-pallet horizontal mill, dedicated setup, Fanuc controls (Mid skill)
• MAZAK Integrex i500 â€“ 5-axis twin spindle mill/turn, SMOOTH AI controls (High skill)
• MAZAK e-1250 â€“ 5-axis VTL with 8-pallet system, SMOOTH AI controls (Mid to High skill)

• Set up, operate, and maintain multi-axis CNC machines with minimal supervision.

• Load and secure parts, fixtures, and tools accurately.

• Read and interpret complex blueprints, GD&T specifications, and machining instructions.

• Perform complete machine setups, including loading fixtures, selecting programs, and setting work/tool offsets.

• Inspect first articles and production parts using micrometers, calipers, gauges, and indicators.

• Identify and select the correct materials for each job.

• Troubleshoot programming or operational issues in real time.

• Maintain your work center for organization, speed, and quality

• CNC machining experience, including multi-axis machines.

• Experience running vertical mills preferred. 

• Ability to read blueprints and interpret tight tolerances.

• Proven reliability and accountability.

• Strong problem-solving mindset and self-driven attitude.

• Excellent attention to detail and pride in workmanship.

How to Apply:
If you meet these requirements, please call 918.933.5530 to schedule your interview with Teresa.

Walk-ins are welcome! Feel free to stop by 2310 Old Hwy 66, Catoosa, OK 74015  Monday through Friday from 8am–3:30pm. Please bring two forms of ID with you.

HireCall is an equal opportunity employer, and we value diversity.
#CNC

• Provide exceptional customer service at the sales counter
• Answer incoming phone calls and assist customers with product inquiries
• Process counter sales transactions
• Load and unload delivery trucks
• Assist with inventory management and stock organization
• Maintain a clean, safe, and organized store and warehouse area
• Work closely with team members to ensure daily operations run smoothly
• Lift up to 50 lbs. independently and team lift heavier items as needed

• At least 1 year of experience in retail, warehouse, customer service, or a related environment preferred
• Strong communication and customer service skills
• Electrical parts experience is a plus
• Dependable, punctual, and team-oriented
• Ability to work in a warehouse/store setting and perform physical duties
• Ability to lift and move materials throughout the workday
• Valid driver's license required
• Candidates age 21+ are strongly preferred, as future delivery opportunities may be available after permanent hire
• Mature and motivated candidates under 21 will also be considered

• Exceptional health insurance coverage at affordable rates for employees and families
• $20,000 Life Insurance and AD&D coverage
• Employee Stock Ownership Plan (ESOP)
• 401(k) Plan with Profit Sharing
• Paid Time Off (PTO)
• Holiday Pay
• Discount Dental and Vision Plan
• Voluntary Life and AD&D Insurance
• Section 125 (Cafeteria) Plan
• Workers' Compensation Coverage

• Long-term career opportunity
• Potential for advancement and increased earnings
• Stable company with strong employee retention
• Friendly, team-oriented workplace
• Excellent benefits package upon permanent hire

• Assist families by interpreting and translating documents and services in both English and Spanish.
• Collect, organize, and file documents while maintaining accurate records.
• Provide exceptional customer service both over the phone and in person.
• Communicate verbal and written information clearly while maintaining strict confidentiality.
• Explain available programs and referral resources, including application instructions.
• Ask clarifying questions and accurately document client information in electronic data systems.
• Determine family eligibility based on established program requirements.
• Perform data entry with a high degree of accuracy.
• Complete additional administrative duties as assigned.

• Fluent in Spanish and English (reading, writing, and speaking) required.
• Previous experience in customer service, administrative support, or a related office environment.
• Strong data entry, organizational, and communication skills.
• Intermediate proficiency in Microsoft Word, Excel, and data entry.
• Ability to prioritize multiple tasks and meet deadlines.
• Detail-oriented with excellent problem-solving skills.
• Ability to work well under pressure in a fast-paced environment.
• Must maintain strict confidentiality of sensitive information.
• Friendly, professional, dependable, and able to build positive relationships with clients.

• Positive attitude and strong work ethic
• Excellent attendance and punctuality
• Strong interpersonal and communication skills
• Ability to remain composed and professional in challenging situations
• Self-motivated with the ability to take initiative

• Perform routine maintenance and repairs on apartment units and common areas
• Troubleshoot and repair plumbing issues (leaks, clogs, fixture replacements)
• Diagnose and repair electrical systems (outlets, lighting, minor wiring)
• Complete work orders efficiently and accurately
• Conduct preventative maintenance and inspections
• Prepare vacant units for new residents (turns/make-readies)
• Maintain tools, equipment, and service records
• Follow all safety procedures and company standards

• Previous apartment or property maintenance experience preferred
• Strong knowledge of plumbing and electrical systems
• Ability to work independently and manage time effectively
• Valid driver’s license and reliable transportation required
• Ability to lift and move materials/equipment as needed
• High School Diploma or GED preferred

• Must be able to multi-task in a fast-paced environment
• Front office experience, preferred (answering calls, scheduling, patient calls, refill requests, prior authorizations, etc.)
• Insurance experience, preferred
• Records patient data in EPIC EMR system at each visit, including but not limited to, vital signs, height, weight, allergies & medication changes.
• Obtains all necessary consents prior to treatment or procedure
• Trained to give injections
• Displays excellent customer service, verbal & written communication and attention to detail.

• Current, up-to-date LPN licensure
• Associate degree, required
• 2+ years of EMR systems experience, preferable EPIC - (CKD/ESRD experience is a huge plus)
• Minimum of 2+ years of urology or nephrology experience with knowledge of drugs and labs specific to the field of pain management
• BLS Certification, preferred
• Must be a team player, have a positive attitude and possess soft skills needed to be successful.

• Must be able to multi-task in a fast-paced environment
• Escort patients to and from exam room
• Records patient data in EHR at each visit, including but not limited to, vital signs, height, weight, allergies & medication changes.
• Obtains all necessary consents/authorizations prior to treatment or procedure
• Schedules surgeries, patient referrals, and appointments as required
• Prepare and stock exam rooms & procedure rooms
• Follows all exam & treatment room disinfections, OSHA and HIPAA protocols
• Trained to give injections
• Maintain efficient patient flow
• Displays excellent customer service, verbal & written communication and attention to detail
• Patient Triage Experience a plus!

• Must have proof of current, up-to-date certification or registration
• Must have high school diploma or general education equivalent
• Must be attentive to detail
• Must be able to pass pre-employment assessments
• EPIC EMR software experience, preferred - (CKD/ESRD experience is a huge plus)
• Must have a solid work ethic: shows Initiative, stays busy and focused, asks clarifying questions.
• Must be a team player, have a positive attitude and possess soft skills needed to be successful.

• ECG experience
• Must be able to multi-task in a fast-paced environment
• Escort patient to and from exam room.
• Records patient data in EHR at each visit, including but not limited to, vital signs, height, weight, allergies & medication changes.
• Data entry and filing
• Insurance experience a plus
• Obtains all necessary consents/authorizations prior to treatment or procedure
• Schedules surgeries, patient referrals, and appointments as required.
• Prepare and stock exam rooms & procedure rooms
• Follows all exam & treatment room disinfections, OSHA and HIPAA protocols
• Maintain efficient patient flow
• Displays excellent customer service, verbal & written communication and attention to detail.
• Patient Triage Experience a plus! 

• Assemble products using job packets, blueprints, and work instructions
• Utilize hand tools and power tools, including drills, screwdrivers, rivet guns, and other assembly equipment
• Inspect completed work to ensure quality standards and specifications are met
• Read and interpret blueprints, drawings, and assembly instructions
• Maintain a clean, organized, and safe work area
• Work closely with team members and supervisors to achieve production goals
• Assist with final inspections, packaging, and shipping activities as needed
• Follow all company safety procedures and operational guidelines

• 1-2 years of experience in a manufacturing or mechanical assembly environment
• Experience assembling products with tight tolerances and quality requirements
• Proficient with hand tools, power tools, tape measures, and measuring devices
• Ability to read and interpret blueprints, job packets, and technical instructions
• Strong attention to detail and commitment to producing quality work
• Positive attitude with the ability to work effectively in a team environment
• Able to manage multiple priorities in a fast-paced manufacturing setting
• Ability to stand for extended periods and lift up to 50 pounds

• Competitive pay: $21-$25 per hour, based on experience
• Climate-controlled work environment
• Stable Monday-Friday schedule
• Opportunity to grow with a respected manufacturing operation
• Weekly pay through HireCall

• Assist with finning and assembly operations for air cooler components
• Operate hand and power tools safely and effectively
• Read and use tape measures accurately
• Load, unload, and move materials throughout the production area
• Support machine operators and production personnel as needed
• Maintain a clean and organized work area
• Follow all company safety procedures and production standards
• Perform other general labor and manufacturing duties as assigned

• Minimum 6 months of manufacturing experience required
• Construction or industrial labor experience is a plus
• Must pass a tape measure test
• Experience using hand and power tools required
• Ability to lift, carry, and move materials throughout the shift
• Ability to work overtime and Saturdays as needed
• Dependable attendance and strong work ethic

• Perform mechanical assembly of air-cooler components and equipment
• Use hand tools and power tools safely and effectively
• Read and follow work instructions, assembly drawings, and specifications
• Assist with fitting, mounting, and securing components during assembly
• Inspect parts and completed assemblies for quality and accuracy
• Maintain a clean and organized work area
• Follow all safety procedures and company policies

• Previous mechanical assembly experience required
• Experience using hand tools and power tools
• Ability to lift, carry, push, and pull heavy materials throughout the shift
• Strong attention to detail and quality workmanship
• Ability to work in a team environment and follow instructions
• Reliable attendance and strong work ethic
• Willingness to work overtime as needed

• Frequent standing, walking, bending, and lifting
• Ability to lift up to 75+ pounds regularly
• Ability to work in a manufacturing environment

• Diagnose, troubleshoot, and repair heavy construction equipment including:
  • Excavators
  • Dozers
  • Loaders
  • Other heavy equipment
• Perform repairs on:
  • Hydraulic systems
  • Pneumatic systems
  • Electrical systems
  • Mechanical components
• Conduct preventative maintenance and equipment inspections
• Identify and resolve equipment performance issues
• Maintain a safe and organized work environment

• Comparable to working on a highway or construction job site
• No shop environment – all work is performed outdoors in varying weather conditions
• Must be comfortable working in heat, cold, wind, and other outdoor elements

• Previous heavy equipment mechanic experience required
• Strong knowledge of hydraulics, pneumatics, electrical systems, and diesel-powered construction equipment
• Ability to diagnose and repair heavy equipment efficiently
• Must have own basic mechanic tools
• Ability to lift, bend, stoop, and work in physically demanding conditions
• Dependable attendance and strong safety awareness

• Associates will be required to complete a safety orientation video prior to reporting to the worksite (approximately 3.5 hours).
• HireCall will provide one orange hard hat; replacement hard hats will be provided by the client thereafter.

• Set up and weld components for sheet metal products using MIG (primary) and TIG (as needed)
• Secure parts using fixtures, jigs, and holding tables
• Work with carbon steel, stainless steel, and exotic metals
• Read and interpret blueprints to meet precise specifications
• Use precision measuring tools (micrometers, calipers, gauges)
• Troubleshoot weld issues and maintain high-quality standards

• Written portion: Weld symbols and shop math (including fractions)
• Practical test: 3G MIG weld with backer plate

• Experience with MIG welding
• Experience with TIG is a plus
• Fitter/Welder experience is a plus
• Read and interpret blueprints to meet precise specification
• Ability to pass a MIG weld test
• Basic shop math skills including fractions
• Understanding of voltage and amperage adjustments for welding equipment
• High School Diploma or GED equivalent
• Ability to pass a background check

• Ability to lift, push, pull, or carry up to 50 lbs
• Must be comfortable standing and walking for extended periods (8+ hours)
• Frequent bending, kneeling, crouching, and stooping
• Ability to work at elevated heights from ladders, scaffolding, or aerial platforms
• Ability to work in varying temperatures when required
• Willingness to work overtime as needed

• Receive, inspect, and organize incoming materials using handheld scan gun technology
• Stock and transfer materials to proper locations throughout the facility
• Pick parts and stage materials for production jobs and customer shipments
• Safely load and unload trucks and trailers
• Maintain accurate inventory records and assist with cycle counts
• Investigate and help resolve inventory discrepancies
• Operate forklifts, pallet jacks, and other material handling equipment
• Work closely with production and warehouse teams to support workflow
• Follow all safety procedures and maintain a clean, organized work environment

• Minimum of 2 years of experience in a warehouse, inventory control, or manufacturing environment
• Experience using Warehouse Management Systems (WMS) and handheld scan guns
• Strong attention to detail and commitment to inventory accuracy
• Forklift experience preferred
• Basic computer skills for inventory tracking and data entry
• Ability to read and follow written and verbal instructions
• Reliable, self-motivated, and team-oriented
• Positive attitude and willingness to learn

• Competitive pay: $19.00 - $23.00 per hour, depending on experience
• Stable Monday-Friday schedule
• Clean, climate-controlled work environment
• Opportunity to work with a growing, established manufacturing company
• Weekly pay through HireCall
• Benefits available

• Set up and operate fabrication machinery and equipment
• Utilize saws, drills, mills, taps, grinders, sanders, and deburring equipment to finish parts
• Read and interpret blueprints, drawings, and work instructions
• Inspect finished products to ensure quality standards are met
• Accurately measure parts using precision measuring tools
• Move completed parts to the next stage of production
• Maintain a clean, organized, and safe work environment
• Follow all company safety procedures and quality requirements

• Previous experience in a fabrication or metal manufacturing environment preferred
• Experience with metal fabrication processes and equipment
• Ability to read and interpret blueprints and technical drawings
• Proficiency using measuring instruments including:
  • Calipers
  • Height Gauges
  • Tape Measures
  • Squares
  • Angle Finders
• Knowledge of basic shop math
• Experience operating industrial machinery and equipment
• Press Brake and metal forming experience preferred
• Strong attention to detail and quality
• Ability to work independently and as part of a team
• Ability to lift, carry, and move materials as needed throughout the shift

• Weekly Pay
• Competitive Pay: $21.00 - $25.00 per hour
• Climate-Controlled Work Environment
• Full-Time, Stable Schedule
• Opportunity for Growth and Advancement

• Monday – Friday
• 6:00 AM – 4:30 PM
• Overtime available as needed

• Lay out, fit, and assemble header piping systems according to blueprints and specifications
• Measure, cut, bevel, and prepare pipe and components for fabrication
• Perform accurate fit-ups for welding operations
• Read and interpret blueprints, shop drawings, and weld symbols
• Verify alignment and dimensional accuracy of assemblies
• Work closely with welders and production teams to meet quality and production goals
• Maintain a safe and organized work environment
• Follow all company safety and quality procedures

• Previous pipe fitting, header assembly, fabrication, or related manufacturing experience
• Ability to read and interpret blueprints and fabrication drawings
• Strong measuring, layout, and fitting skills
• Experience using hand tools, power tools, and fabrication equipment
• Ability to lift up to 50 pounds and work in a production environment
• Dependable attendance and strong work ethic

• 3/8" Plate Test
• 2G MIG weld, all the way out
• Welds must successfully pass:
  • Ultrasonic Testing (UT)
  • X-Ray Inspection

• Independently set up and operate Mazak CNC lathes including QT, Nexus, Integrex, and similar models
• Load raw materials and configure tooling, offsets, fixtures, and workholding
• Verify machine setup accuracy before production begins
• Monitor machine performance and make adjustments as needed to ensure efficiency and quality
• Maintain production schedules while meeting quality standards

• Read and interpret blueprints, engineering drawings, work orders, and GD&T specifications
• Edit Mazatrol conversational programs and/or G-code programs at the machine
• Adjust tooling paths, feeds, and speeds to optimize machining performance
• Troubleshoot machining issues and implement corrective actions

• Perform in-process and final inspections using:
  • Micrometers
  • Calipers
  • Dial Indicators
  • Gauges
• Verify all finished parts meet dimensional and quality specifications
• Maintain compliance with company quality standards and procedures

• Perform routine machine maintenance, lubrication, and cleaning
• Troubleshoot machine alarms, tooling issues, and production concerns
• Conduct basic machine diagnostics to minimize downtime

• Complete production reports, inspection records, and machine logs accurately
• Follow all safety procedures and manufacturing standards
• Maintain a clean and organized work area

• 2-5+ years of experience operating and setting up Mazak CNC lathes
• Experience with Mazatrol conversational programming and/or G-code editing
• Strong setup experience including tooling, fixtures, and part setup
• Ability to read and interpret blueprints and GD&T specifications
• Knowledge of speeds, feeds, tooling selection, and machining practices
• Experience using precision measuring equipment
• Strong attention to detail and ability to work independently
• High School Diploma or GED required

• Experience with multi-axis and live-tooling Mazak machines
• Familiarity with ISO 9001 or AS9100 manufacturing environments
• Forklift experience or certification
• Experience with SPC tracking and ERP systems
• Technical school or vocational machining training

• CNC Lathe Setup & Operation
• Mazatrol Programming
• G-Code Editing
• Blueprint & GD&T Interpretation
• Precision Measurement & Inspection
• Tooling and Fixture Setup

• Operate industrial spray painting equipment safely and efficiently
• Mix paints and coatings according to specifications
• Clean paint pots, spray guns, hoses, and related equipment
• Prepare surfaces for painting including cleaning and masking
• Inspect finished products to ensure quality standards are met
• Maintain a clean and organized work area
• Follow all company safety procedures and PPE requirements

• Previous industrial painting experience required
• Experience using industrial spray equipment required
• Ability to mix paints and coatings accurately
• Experience cleaning and maintaining paint equipment
• Ability to lift, bend, stand, and work in a manufacturing environment
• Strong attention to detail and quality workmanship
• Reliable attendance and strong work ethic

• High School Diploma or equivalent
• 2 years' construction or installation experience, preferred
• Able to lift a minimum of 60 pounds.
• Able to complete and pass onboarding requirements
• Must have a valid driver’s license and clean MVR
• Must maintain a professional and clean-cut physical appearance
• Valid drivers license required

• Perform Flux Core welding on structural steel components
• Read and interpret basic work instructions and measurements
• Accurately read and use a tape measure
• Operate welding equipment safely and efficiently
• Inspect completed welds for quality and accuracy
• Maintain a clean and safe work environment
• Follow all company safety procedures and production requirements

• Welding certificate from a Vo-Tech, trade school, or accredited welding program OR previous Flux Core welding experience
• Ability to pass a 3G Flux Core welding test
• Ability to read a tape measure and pass a measurement test
• Strong work ethic and willingness to learn
• Reliable transportation and good attendance
• Ability to work in a manufacturing environment and stand for extended periods

• On-the-job welding experience
• Experience working in a fabrication or manufacturing environment
• Familiarity with welding safety practices and procedures

• Operate industrial spray painting equipment safely and efficiently
• Mix paints and coatings according to specifications
• Clean paint pots, spray guns, hoses, and related equipment
• Prepare surfaces for painting including cleaning and masking
• Inspect finished products to ensure quality standards are met
• Maintain a clean and organized work area
• Follow all company safety procedures and PPE requirements

• Previous industrial painting experience required
• Experience using industrial spray equipment required
• Ability to mix paints and coatings accurately
• Experience cleaning and maintaining paint equipment
• Ability to lift, bend, stand, and work in a manufacturing environment
• Strong attention to detail and quality workmanship
• Reliable attendance and strong work ethic

• Day Shift: 6:00 AM – 4:30 PM Monday–Friday | Saturdays as Needed
• Night Shift: 5:30 PM – 3:00 AM Monday–Friday | Saturdays as Needed

• Weld headers, pipe, and structural components used in air cooler manufacturing
• Perform MIG, TIG, and/or Flux Core welding based on production needs
• Read and interpret blueprints, weld symbols, and fabrication drawings
• Fit and align materials prior to welding
• Inspect completed welds for quality and accuracy
• Operate grinders, torches, cutting equipment, and fabrication tools
• Maintain a clean and safe work environment
• Follow all safety guidelines and quality procedures
• Work overtime and Saturdays as required to meet production schedules

• Minimum 2+ years of welding experience in manufacturing or fabrication
• Experience welding pipe or pressure-related components preferred
• Ability to read blueprints and welding symbols
• Familiarity with tape measures, hand tools, and fabrication equipment
• Ability to lift up to 50 lbs and stand for extended periods
• Strong attention to detail and quality workmanship
• Dependable attendance and stable work history required

• Air cooler, heat exchanger, pressure vessel, or heavy fabrication experience
• FCAW, MIG, and TIG welding experience
• Fit-up and fabrication knowledge
• Overhead crane and forklift experience is a plus

• Monday – Friday
• 6:00 AM – 4:30 PM
• Some Saturdays as needed

• $22.00 - $27.00 per hour
• Pay based on experience and qualifications

• Fit and assemble header plate components according to engineering drawings and specifications
• Read and interpret blueprints, shop drawings, and work instructions
• Lay out, align, and position parts for assembly and fabrication
• Verify dimensions and tolerances using precision measuring instruments
• Operate hand tools, power tools, grinders, and other fabrication equipment
• Ensure proper fit-up prior to welding and final assembly
• Inspect completed work for quality and accuracy
• Maintain a clean and safe work environment
• Follow all company safety procedures and manufacturing standards

• Previous experience as a fitter is required
• Experience in a fabrication, manufacturing, or heavy industrial environment preferred
• Ability to read and interpret blueprints and fabrication drawings
• Proficient with hand tools and power tools
• Experience using precision measuring tools such as tape measures, squares, calipers, and other layout instruments
• Strong attention to detail and quality
• Ability to work independently and as part of a team
• Able to stand, bend, lift, and work in a manufacturing environment throughout the shift

• Must be able to pass pre-employment screening requirements
• Reliable transportation and attendance required
• Steel-toe boots required

• Perform structural fitting and welding on carbon steel and stainless steel
• Interpret and work from blueprints and fabrication drawings
• Accurately measure materials using a tape measure
• Identify and differentiate between various metals used in fabrication
• Assist in the fabrication and assembly of components
• Operate overhead cranes and forklifts safely and efficiently
• Complete required welding test (T-plate uphill weld and flat stack weld)
• Maintain high standards of quality control
• Follow all safety procedures and guidelines

• Minimum 2+ years of structural fitter/welding experience
• Experience welding carbon steel and stainless steel
• Ability to read blueprints and perform precise measurements
• Experience operating overhead cranes and forklifts
• Ability to pass a hands-on welding test

• Welding certification (AWS or equivalent)
• Experience in power plant or gas turbine fabrication
• Previous work with muffler or industrial fabrication

• Valid OK license with a clean driving record (Real ID, preferred)
• High school diploma or equivalent
• Excellent time-management and organizational skills
• Ability to read and follow maps and driving directions
• Strong communication skills, both written and verbal
• Ability to work independently with minimal supervision
• Willingness to work flexible hours
• Physical ability to lift and move heavy objects as needed (up to 70 pounds)
• Must be willing to work overtime
• Must maintain a professional appearance and be customer service oriented
• Must be able to consistently bend, stoop, twist, stand and lift
• Must be able to load, unload, document shipments received
• Forklift experience, required

• Safely load and unload workpieces onto the machine.
• Inspect workpieces to identify any defects, irregularities, or imperfections.
• Measure and mark workpieces to ensure proper dimensions and tolerances.
• Perform grinding operations to remove excess material, achieve desired dimensions, and create a smooth finish.
• Heavy lifting, cleaning cores, banding metal pieces.
• Make adjustments to the machine settings as needed to ensure accuracy.

• High school diploma or equivalent.
• Previous experience as a deburr tech, grinder or in a similar role in a manufacturing or fabrication shop.
• Knowledge of grinding techniques, tools, and equipment.
• Familiarity with precision measuring instruments.
• Strong attention to detail and the ability to work with precision.
• Physical stamina and the ability to lift and move heavy workpieces when necessary.
• Must be able to pass pre-employment requirements

• Operate shop bandsaws, drill presses, and standard metal fabrication equipment
• Measure and cut pipe and metal materials to precise specifications using blueprints and work orders
• Read and interpret fabrication prints and tape measurements accurately
• Identify pipe diameters, material grades, and heat numbers for tracking and logging purposes
• Work with a variety of materials including:
  • Pipe
  • Round bar
  • Square stock
  • Plastics
  • Various metal materials
• Operate hand and power tools safely and effectively
• Operate forklifts to move materials throughout the shop
• Maintain a clean, organized, and safe work environment
• Follow all company safety procedures and production standards

• Previous experience operating bandsaws and fabrication shop equipment required
• Ability to read and interpret blueprints and fabrication drawings
• Strong understanding of pipe materials, diameters, and grading systems
• Forklift experience preferred (2+ years strongly preferred)
• Must be able to pass a tape measure test
• Strong attention to detail and commitment to quality
• Ability to work independently and as part of a team
• Must pass pre-employment background check and drug screen

• Operate multiple machines at one time
• Perform in-process inspections to ensure parts meet company quality standards
• Read and use precision measuring devices
• Read and accurately use a tape measure
• Grinding and dressing parts
• Perform tool changes and basic machine setups
• Assist with general shop duties as needed
• Follow all safety and production procedures

• Previous shop or manufacturing experience preferred
• Knowledge of numeric controls is a plus
• Ability to use precision measuring tools
• Must be dependable and safety conscious
• Steel toe boots required
• Must be able to work in a safety-sensitive environment

• Operate manual lathes, grinders, and centerless grinding equipment
• Read and interpret blueprints and work orders
• Use precision measuring tools including O.D. calipers and I.D. micrometers
• Maintain quality and accuracy throughout production
• Follow all shop safety procedures and company standards
• Work overtime as needed, including staying late on Fridays and occasional Saturdays

• Experience with manual machining required
• Lathe, grinding, or centerless grinding experience required
  (Experience in all three preferred)
• Must be able to read blueprints
• Strong math skills required
• Ability to accurately use precision measuring equipment
• Steel toe boots required
• Reliable transportation required – location is not on a bus route

• Safely operate CNC machine centers and numerical lathes
• Perform machine setup and troubleshooting as needed
• Operate additional shop equipment including:
  • Manual mills and lathes
  • Saws
  • Drill presses
  • Lead screw tappers
• Perform first-piece and in-process inspections
• Utilize precision measuring tools including:
  • Calipers
  • Micrometers
  • Depth mics
  • Drop indicators
  • Pin gages
  • Thread gages
  • Profilometers
  • Functional gages
• Read and interpret blueprints, routers, work instructions, bills of material, and finish specifications
• Maintain accurate production and labor records
• Identify and report nonconforming parts or production issues
• Request equipment maintenance when needed
• Record scrap and rework accurately
• Maintain a clean, safe, and organized work area
• Perform additional duties as assigned

• Previous CNC machining experience required
• Must be able to pass a CNC machining test
• Setup and troubleshooting experience preferred
• Experience with CMMs or optical comparators preferred
• Strong blueprint reading and inspection skills required
• Understanding of manufacturing processes and quality standards
• Ability to work independently and as part of a team
• Strong attention to detail and commitment to safety

• Regularly required to stand and walk throughout shift
• Occasionally required to sit, bend, kneel, crouch, crawl, and reach
• Must be able to lift and/or move up to 75 lbs
• Close vision and precision measurement capability required

• 1 YEAR EXPERIENCE required in Flux experience. 
• Must be able to pass a 3G FLUXCORE weld test.
• Basic Math skills
• Able to read a tape measure
• Must have a firm understanding of volts and amps and be able to adjust accordingly.
• Must follow all safety policies and procedures.
• Must be willing to work frequently overtime.
• Must have the ability to read, write, and communicate effectively.
• Must be able to perform tasks in hot and cold temperatures.
• Work will include frequent bending, kneeling, crouching, and stooping and occasional climbing onto equipment.
• Work involves standing and/or walking for extended periods of time, up to a minimum of 8 hours per day.
• The essential job functions and duties outlined in this position are considered safety sensitive. 
• High School degree, diploma, or a GED equivalent qualification from a certified college.

• Valid OK license with a clean driving record (Real ID, preferred)
• Endorsements: Hazmat and Tanker
• High school diploma or equivalent
• No auto restrictions, must be able to drive vehicles with manual transmission
• Ability to read and follow maps and driving directions
• Strong communication skills, both written and verbal
• Ability to work independently with minimal supervision
• Willingness to work flexible hours and overtime
• Physical ability to lift and move heavy objects/cylinders as needed (up to 50 pounds)
• Must maintain a professional appearance and be customer service oriented
• Must be able to consistently bend, stoop, twist, stand and lift
• Must have 2+ years of CDL A driving experience
• Must be able to pass pre-employment assessments
• Forklift experience, preferred

• Hand cut glass to precise measurements and specifications
• Operate polishing and beveling equipment efficiently
• Inspect finished glass for quality and accuracy
• Read and follow work orders, blueprints, and fabrication drawings
• Safely move, lift, twist, bend, and handle glass materials weighing 50+ lbs
• Maintain a clean and organized work area
• Occasionally assist with deliveries or installer support as needed

• Minimum 2+ years of glass fabrication experience required
• Experience with other glass fabrication shops is highly preferred
• Must be able to read a tape measure and blueprints
• Proven experience operating polishing and beveling equipment
• Strong knowledge of glass types and fabrication methods
• Excellent attention to detail and accuracy
• CNC and tempering experience, preferred
• Valid Driver’s License required

• Day Shift: Monday – Friday, 6:00am – 4:30pm, Saturdays as needed
• Night Shift: Monday – Friday, 5:30pm – 3:00am, Saturdays as needed

• Perform stick welding (SMAW) on structural and support components
• Weld top tube supports according to blueprints and specifications
• Read and interpret welding symbols, shop drawings, and fabrication prints
• Measure and verify materials using tape measures and other precision tools
• Operate hand tools, grinders, and power tools safely
• Inspect welds for quality and compliance with company standards
• Maintain a clean and safe work environment
• Work closely with fitters, welders, and production teams to meet deadlines

• Previous stick welding experience required
• Experience in manufacturing, fabrication, or heavy industrial environments preferred
• Ability to read blueprints and welding drawings
• Must be able to pass a welding test
• Ability to use a tape measure accurately
• Experience with hand and power tools
• Ability to lift, bend, stand, and work in a non-climate-controlled environment
• Dependable attendance and strong work ethic required

• Experience in pressure vessel, structural steel, or air cooler manufacturing
• Overhead crane or forklift experience is a plus

• Day Shift: Monday – Friday, with Saturdays as needed
• Night Shift: Monday – Friday, with Saturdays as needed

• Weld header pipes and related components used in air cooler manufacturing
• Read and interpret blueprints, weld symbols, and shop drawings
• Perform MIG, Flux Core, and/or Stick welding as required
• Ensure weld quality meets company and customer specifications
• Use measuring tools to verify dimensions and tolerances
• Operate grinders, torches, and other fabrication tools safely
• Maintain a clean and safe work area

• Previous welding experience in manufacturing or fabrication required
• Experience welding large pipe or pressure-related components preferred
• Ability to read blueprints and weld symbols
• Knowledge of fitting and fabrication processes
• Must pass a weld test
• Ability to lift up to 50 lbs and work in a non-climate-controlled environment

• Fit and assemble header pipe systems according to blueprints and specifications
• Measure, cut, align, and tack components prior to welding
• Lay out pipe and structural components accurately
• Operate hand tools, power tools, grinders, and measuring equipment
• Verify fit-up quality and maintain dimensional accuracy
• Work closely with welders and fabrication teams to meet production goals

• Previous pipe fitting or fabrication experience required
• Ability to read blueprints and tape measures accurately
• Experience with layout, fitting, and tack welding preferred
• Strong understanding of fabrication shop safety
• Ability to work overtime and Saturdays as needed

• Fit and assemble header plates and related structural components for air cooler units
• Read and interpret fabrication drawings and specifications
• Align, clamp, and tack materials for final welding
• Ensure proper spacing, measurements, and overall fit-up quality
• Use overhead cranes and fabrication equipment safely
• Assist with material handling and production support as needed

• Previous fitting or heavy fabrication experience preferred
• Ability to read blueprints and use precision measuring tools
• Experience using hand and power tools in a manufacturing environment
• Overhead crane experience is a plus
• Dependable attendance and strong attention to detail required

• Set up and operate CNC lathes and mills
• Read and interpret blueprints and work instructions
• Perform machine adjustments and tooling changes
• Inspect finished parts to ensure quality standards are met
• Monitor machine performance and troubleshoot issues as needed
• Maintain a clean and safe work environment
• Complete production and quality documentation

• Minimum of 2 years of CNC setup experience required
• Experience setting up CNC lathes and mills
• Ability to read and interpret blueprints and measuring tools
• Strong attention to detail and quality control
• Stable work history and reliable attendance
• Experience with Okuma machines is a plus

• Read and interpret blueprints and fabrication drawings
• Layout and fit materials according to print specifications
• Cut, prep, fit, and weld all materials independently
• Perform MIG/Flux Core welding on structural steel components
• Make fabrication adjustments as needed during production
• Troubleshoot fabrication issues and think critically to resolve problems
• Work with steel siding/R-Panel materials used in meter house construction
• Maintain quality workmanship and meet production deadlines
• Follow all safety procedures and maintain a clean work area

• Must be able to pass a 3G Plate Test
• MIG/Flux Combo Weld on 3/4" plate without run-off tabs

• Previous structural fitting and welding experience required
• Strong blueprint reading and layout skills
• Experience with fabrication tools and equipment
• Ability to work independently and efficiently
• Experience with R-Panel or steel siding preferred
• Strong attention to detail and quality control
• Reliable attendance and strong work ethic

• Minimum 2 years of TIG pipe welding experience
• Proven ability to weld in the 6G position
• Experience with schedule 160 pipe preferred
• Must be able to pass the following weld tests:
  • 3G open root MIG with flux-core fill and cap
    • Must pass visual inspection before advancing
  • 6G TIG open root with flux-core fill and cap on 2-inch Schedule 160 pipe
• Strong attention to detail and commitment to quality workmanship
• Ability to work safely in an industrial environment

• Pipe weld tests are scheduled in the morning only
• Testing takes approximately 4 hours to complete
  
  
  If you meet these requirements, please submit your resume to teresa.harmon@hirecall.com or call 918.933.5560 to schedule your interview with Teresa. Walkins are welcome. Feel free to stop by 2310 Old Hwy 66, Catoosa, OK 74015 Monday through Friday from 8am-3:30pm. Please bring 2 forms of ID with you.
   HireCall is an equal opportunity employer, and we value diversity.
   #Hotjobs

• Open root 3G MIG
• Flux-core fill and cap

• Minimum 2 years of MIG and Flux-Core welding experience
• Proven ability to pass a 3G open root MIG / flux-core fill & cap test
• Experience welding vessels or pressure-related components preferred
• Ability to read blueprints and welding symbols
• Strong attention to detail and commitment to quality
• Ability to pass a drug screen and background check

• Welding Test: 6" Sch 80 6G GTAW stringer/hot pass with SMAW fill and cap
• 3G FCAW: 1/2" plate test
• Fitter Test

• Waste heat and process gas boilers (firetube and watertube)
• Steam drums
• Economizers (Experience welding economizer is a plus)
• Superheaters
• Pressure vessels

• Read, interpret, and understand blueprints and welding procedure specifications
• Perform basic and advanced math calculations
• Layout, cut, fit, and tack pressure and non-pressure components including:
  • Cylinders, nozzles, tubes, tubesheets, headers, and structural components
• Utilize leveling equipment to ensure proper orientation and accuracy
• Weld using FCAW, SMAW, and GTAW processes in all positions (flat, horizontal, vertical, overhead)
• Ensure all work meets ASME Code, company, and client quality standards
• Perform carbon arc gouging and oxy-fuel cutting as needed
• Assist with other shop duties as required

• Minimum 3+ years of fitter/welder experience in a manufacturing environment
• 3+ years of vessel welding experience required
• Experience working with carbon steel, stainless steel, chrome, and nickel alloys
• Ability to pass X-ray and other non-destructive testing requirements
• Submerged Arc Welding (SAW) experience is a plus but not required
• Strong attention to detail and commitment to quality and safety

• Operate cranes and forklifts in a safe manner.
• Unloading customers as well as feeding the shredder, all within the same area using a grapple crane.
• Loading trucks with shredded steel using a mag crane.
• Unloading trucks and loading railcars with a mag crane.
• Operating a wheel loader and a skid steer loader.
• Ability to follow safety and operations processes and procedures.

• 2+ years’ experience operating cranes in an industrial environment
• High School diploma or GED
• Ability to work in non-climate controlled work environment
• Must be able to lift up to 50 pounds
• Must have reliable transportation and steady work history
• Steel-toed boots required

• Set up and operate manual and/or CNC mills and lathes
• Edit CNC lathe programs to maintain part accuracy and optimize production
• Perform full machine setups, including tooling, offsets, and adjustments
• Read and interpret blueprints and technical drawings
• Inspect finished parts to ensure they meet specifications and tolerances
• Maintain a clean, organized, and safe work environment
• Follow all company safety policies and quality standards

• 3–5 years of recent experience operating mills and lathes
• Proven ability to edit machining programs
• Experience performing complete machine setups independently
• Strong blueprint reading and measurement skills
• High attention to detail and commitment to quality workmanship

• Ability to stand for extended periods
• Ability to lift up to 50 lbs as needed
• Ability to safely operate industrial machinery

• Dress Code: Casual; steel-toe boots required
• Background Check: Case-by-case (no theft, violence, or sex-related offenses)
• Drug Screen: (OMMA card accepted for non-driving positions)

• Welding Test: 6" Sch 80 6G GTAW stringer/hot pass with SMAW fill and cap
• 3G FCAW: 1/2" plate test
• Fitter Test

• Waste heat and process gas boilers (firetube and watertube)
• Steam drums
• Economizers (Experience welding economizer is a plus)
• Superheaters
• Pressure vessels

• Read, interpret, and understand blueprints and welding procedure specifications
• Perform basic and advanced math calculations
• Layout, cut, fit, and tack pressure and non-pressure components including:
  • Cylinders, nozzles, tubes, tubesheets, headers, and structural components
• Utilize leveling equipment to ensure proper orientation and accuracy
• Weld using FCAW, SMAW, and GTAW processes in all positions (flat, horizontal, vertical, overhead)
• Ensure all work meets ASME Code, company, and client quality standards
• Perform carbon arc gouging and oxy-fuel cutting as needed
• Assist with other shop duties as required

• Minimum 3+ years of fitter/welder experience in a manufacturing environment
• 3+ years of vessel welding experience required
• Experience working with carbon steel, stainless steel, chrome, and nickel alloys
• Ability to pass X-ray and other non-destructive testing requirements
• Submerged Arc Welding (SAW) experience is a plus but not required
• Strong attention to detail and commitment to quality and safety

• Assemble large mechanical systems with up to 100 parts per workstation
• Work with vehicle track systems, diesel engines, pumps, and hydraulic components
• Read and interpret blueprints and schematics
• Inspect assemblies and ensure quality standards are met
• Assist with equipment setup, troubleshooting, and repairs
• Travel occasionally to customer sites for installations and service

• 2+ years of technical or vocational training (preferred)
• Experience with mechanical, electrical, and hydraulic assemblies
• Ability to read blueprints and schematics
• Basic computer skills
• Strong work ethic and communication skills
• Willingness to travel domestically as needed

• Standing, bending, squatting, and climbing throughout the shift
• Frequent climbing on/into machinery
• Lifting, pushing, and pulling materials up to 50 lbs
• Working in tight or confined spaces when needed

• Perform MIG, Fluxcore, and TIG welding on metal components according to specifications
• Read and interpret weld symbols, blueprints, and work instructions
• Set up and adjust welding equipment, including voltage and amperage settings
• Inspect finished welds to ensure quality and structural integrity
• Maintain a clean and safe work area and follow all safety policies and procedures
• Work collaboratively with team members to meet production goals

• Written portion: Weld symbols and shop math (including fractions)
• Practical test: 3G MIG/Fluxcore weld with backer plate

• 1–3 years of on-the-job welding experience
• Experience with MIG, TIG, and Fluxcore welding
• Ability to pass a MIG/Fluxcore weld test
• Basic shop math skills including fractions
• Understanding of voltage and amperage adjustments for welding equipment
• High School Diploma or GED equivalent
• Ability to pass a background check

• Ability to lift, push, pull, or carry up to 50 lbs
• Must be comfortable standing and walking for extended periods (8+ hours)
• Frequent bending, kneeling, crouching, and stooping
• Ability to work at elevated heights from ladders, scaffolding, or aerial platforms
• Ability to work in varying temperatures when required
• Willingness to work overtime as needed

• Set up and operate manual mills and lathes, including Bridgeport Manual Mills
• Perform your own setups and create custom workholding for unique parts
• Read and interpret blueprints and drawings to meet exact specifications
• Use micrometers, calipers, and gauges to verify accuracy and dimensions
• Machine high-mix, low-volume parts with precision and consistency
• Inspect your own work to ensure top-quality results
• Troubleshoot and resolve machining challenges as they arise
• Maintain a clean, organized workspace following all safety and 5S standards

• Proven experience in manual machining (mills and lathes required)
• Strong measuring and inspection skills
• Ability to read blueprints, understand tolerances, and plan machining steps
• Comfort working independently on one-of-a-kind or small-batch parts
• Physical ability to stand, bend, and move throughout most of your shift
• Ability to lift and move parts up to 50 pounds (with lifting devices as needed)

• Operate fabrication equipment such as saws, drills, and hand plasma torches.
• Perform accurate layout of cuts using tape measures and blueprints.
• Safely handle and prepare materials for fabrication.
• Maintain equipment and work area in a clean, safe, and efficient condition.
• Work as part of a team to meet production goals and deadlines.

• Proven experience with fabrication tools and equipment (saws, drills, torches, grinders, etc.).
• Ability to read and interpret blueprints and technical drawings.
• Skilled at accurate measurement and layout using tape measures.
• Strong attention to detail and commitment to safety.
• Reliability and punctuality are a must.

• Competitive pay starting at $18 - $20/hour
• Day shift schedule with consistent hours
• Opportunity to work in a growing, team-oriented environment